Overlay 2
Overlay 2
IOp(2/9)
Printing of distance and angle matrices.
| 0 | Default: print if ≤50 atoms and not #T. |
| 1 | Do not print the distance matrix. |
| 2 | Print distance matrix. |
| 00 | Default: do not print. |
| 10 | Do not print the angle matrix. |
| 20 | Print the angle matrix, using z-matrix connectivity if possible. |
| 30 | Use cutoffs instead of the z-matrix for determining which angles to print. |
| 000 | Default: same as 100. |
| 100 | Do not print dihedral angles. |
| 200 | Print dihedral angles, using the z-matrix for connectivity info. |
| 300 | Print dihedral angles, using a distance cutoff for connectivity info. |
| 0000 | Default: print only for small cases. |
| 1000 | Do not print the Cartesian coordinates in the input orientation. |
| 2000 | Do print the Cartesian coordinates in the input orientation. |
IOp(2/10)
Tetrahedral angle fixing
| 0 | Default (don’t test). |
| 1 | Angles within 0.001 degree of 109.471 will be set to ACOS(-1/3). |
| 2 | Do not test for such angles. |
IOp(2/11)
Printing of z-matrix and resultant coordinates.
| 0 | Default (print if 50 atoms or less). |
| 1 | Print. |
| 2 | Don’t print. |
IOp(2/12)
Crowding abort control.
| 0 | Default (same as 1). |
| 1 | Abort the run for zero atomic distances only. |
| 2 | Abort the run if any atoms are within 0.5 Å. |
| 3 | Do not abort the run regardless of 0 distances. |
IOp(2/13)
Punch coordinates.
| 0 | No. |
| 1 | Yes, in ‘atoms’ format (3E20.12). Note: atoms will not take the atomic numbers, so they are not punched. |
| 2 | Yes, in format suitable for coord. input to Gaussian. The atomic numbers and coordinates are punched in (I2,3E20.12). |
IOp(2/14)
Internal coordinate linear independence.
| 0 | Default (same as 2). |
| 1 | Perform the test, but do not abort the job. |
| 2 | Do not perform the test. |
| 3 | If internal cords. are in use, test the variables for linear indep, and abort the job if they’re dep. |
| 10 | Compute nuclear forces as well as second derivatives for the test. This is not correct for the linear independence check, but is useful for debugging the derivative transformation routines. |
| 100 | Abort the job if the number of z-matrix variables is not exactly the number of degrees of freedom (i.e., this is not a full optimization). |
IOp(2/15)
Symmetry control.
| -1 | Turns on symmetry; same as 0 for molecules but turns on assignment of space group operations for PBC. |
| 0 | Leave symmetry in whatever state it is presently in. |
| 1 | Unconditionally turn symmetry off. Note that symmetry is still called, and will determine the framework group. However, the molecule is not oriented. |
| 2 | Bring the molecule to a symmetry orientation, but then disable further use of symmetry. |
| 3 | Don’t even call Symm. |
| 4 | Call Symm once with loose cutoffs, symmetrize the resulting coordinates then confirm symmetry with tight cutoffs. |
| 5 | Recover the previous symmetry operations from the RWF, and confirm that the new structure has the same symmetry. |
| 6 | Same as 5, but get symmetry info from the checkpoint. |
| 7 | Read symmetry info from chk and use as is, or turn off symmetry if there is no info on the chk file. |
| 00 | Default (10). |
| 10 | Do re-orientation for PBC. |
| 20 | Suppress re-orientation for PBC. |
| 100 | Turn on symmetry operations for PBC. |
IOp(2/16)
Action taken if the point group changes during an optimization.
| 0 | Default (3). |
| 1 | Keep going. |
| 2 | Keep going, and leave symmetry on, using the old symmetry. |
| 3 | Keep going, and leave symmetry on, using the new symmetry. |
| 4 | Abort the job. |
IOp(2/17)
Tolerance for distance comparisons in symmetry determination.
| 0 | Default (determined in the symmetry package, currently 1.d-8). |
| N>0 | 10-N. |
| N<0 | 10N, use same tolerance for orientation. |
IOp(2/18)
Tolerance for non-distance comparisons in symmetry determination.
| 0 | Default (determined in the symmetry package, currently 1.d-7). |
| N>0 | 10-N. |
| N<0 | 10N, use same tolerance for orientation. |
IOp(2/19)
Largest allowed point group, as Hollerith string.
IOp(2/20)
Number (1-3 for X-Z) of axis to help specify which subgroup of the type specified in IOp(2/19) to use.
IOp(2/21)
Atomic values to use in symmetry assignment/orientation.
| 0 | Default (221). |
| 1 | Atomic numbers. |
| 2 | Atomic masses. |
| 10 | Print symmetry coordinates to high precision. |
| 20 | Do not print symmetry coordinates to high precision. |
| 100 | Save standard orientation as input orientation. |
| 200 | Do not save standard orientation as input orientation. |
IOp(2/29)
Update of coordinates from current z-matrix.
| 0 | Default (1). |
| 1 | No. |
| 2 | Yes, but remove z-matrix. |
| 3 | Yes. |
IOp(2/30)
Read in vector of atom types (for debugging).
| 0 | No |
| 1 | Yes, format (50I2) |
IOp(2/40)
Save (initial) structure and possible constraints in RWF 698.
| 0 | Default (No). |
| 1 | Yes. |
| 2 | Pick up structure from RWF 698 on the checkpoint file. |
| 3 | Read in structure from input stream. |
IOp(2/41)
Force constants for harmonic constraints.
| N<-2 | |N|/106 Hartree/Bohr**2 but read in list of constrained atoms. |
| -2 | Read in force constants for each Cartesian coordinate. |
| -1 | No constraints. |
| 0 | Default (no constraint unless reading constraint from checkpoint file). |
| N>0 | N/106 Hartree/Bohr2. |
IOp(2/42)
Count nearest neighbor interactions.
| 0 | No. |
| N | Count atoms within N/100 Å as neighbors. |
IOp(2/43)
Print standard orientation to high precision.
| 0 | No. |
| 1 | Yes. |
IOp(2/44)
Control for symmetry package.
| 00 | Default (12, unless COM was specified, in which case 21). |
| 1 | Initially. |
| 2 | Do not rotate to principal axes. |
| 10 | Rotate to old axes for C1, Cs, and Ci. |
| 20 | Use principal axes for C1, Cs, and Ci. |
IOp(2/45)
Check ONIOM model systems, counterpoise fragments and related issues.
| 0 | Default (21). |
| 1 | Check that ONIOM model systems and fragments conform to the full system point group. |
| 2 | Don’t check symmetry of model systems and fragments. |
| 10 | Check if there is at least one non-zero nuclear charge. |
| 20 | Don’t check for one charged nucleus |
IOp(2/46)
Check computation of antisymmetric filled irreps.
| 0 | Default (No). |
| 1 | Yes. |
IOp(2/47)
Set global default for recognizing members of degenerate irreps.
| 0 | Standard default set. |
| LLLLLMM | Use (LLLLL/10000)*10-MM |
