Overlay 7
Overlay 7
IOp(7/5)
L707: Corrections computation.
| 0 | Compute both Born-Oppenheimer corrections and one-electron integral second derivative terms. |
| 1 | Compute only Born-Oppenheimer corrections. |
IOp(7/7)
Use of internal coordinates.
| 0 | Yes. |
| 1 | No. |
| 2 | Yes, but neglect first derivatives in conversion of second derivatives to internal coordinates. |
| 1x | Transform first derivatives here, not just in L103. |
IOp(7/8)
Harmonic frequency calculation.
| 0 | Default (10003). |
| 1 | Yes, with most common isotopes. |
| 2 | Yes, with read-in isotopes. |
| 3 | No. |
| 10 | Print higher precision normal modes. |
| 20 | Print normal mode displacements in redundant internals. |
| 30 | Print both HP modes and internal displacements. |
| 40 | Print only intensities and not modes. |
| Nxx | Default scale factor is #N (1=HF, 1/1.12, (2=CBS4=0.91671, 3=CBSQ=0.91844). |
| Mxxx | If M=1, only harmonic thermochemistry. If M=2, do hindered rotor analysis. If M=3, Read hindered rotor parameters from input. |
| Lxxxx | L=1 diagonalize full NAt32 force constant matrix and print low modes, unless there are frozen atoms. L=2 do not diagonalize full FC matrix. |
| Kxxxxx | K=1 print eigenvalues of FC matrices. K=2 also read file names and dump mass-weighted FC matrices (full and projected) to disk. |
| Jxxxxxx | J=1 print normal-mode derivatives. |
IOp(7/9)
Whether to rotate derivatives back to the z-matrix orientation.
| 0 | Yes. |
| 1 | No. |
Whether to rotate and process derivative properties.
| 00 | Default (yes). |
| 10 | Yes. |
| 20 | No. |
IOp(7/10)
First/second derivative control.
| 0 | Do only first derivatives. |
| 1 | Do only second derivatives. |
| 2 | Do both. |
IOp(7/11)
Control of integral derivative algorithm.
| -1 | Default 1e integral derivatives, skip 2e integral derivatives. |
| 0 | Default; use IsAlg to decide. |
| 2 | Scalar Rys SPDF. |
| 3 | Berny SP, Scalar Rys DF. |
| 4 | Old vector Rys SPDF (obsolete). |
| 5 | Berny SP, old vector Rys DF (obsolete). |
| 6 | FoFJK: Rys spdf (obsolete). |
| 7 | Berny SP, FoFJK Rys df (obsolete). |
| 8 | FoFJK: HGP sp, Rys df (obsolete). |
| 9 | Berny SP, FoFJK Rys df (same as 7). |
| 10 | FoFJK: HGP spd, Rys f (obsolete). |
| 11 | Berny SP, FoFJK HGP d Rys f (obsolete). |
| 12 | FoFJK: HGP spdf. |
| 13 | Berny SP, FoFJK HGP df (obsolete). |
| 14 | FoFJK: PRISM spdf. |
| 15 | FoFJK: Berny SP, PRISM df (obsolete). |
IOp(7/12)
Selection of density matrix.
| 0 | Usual SCF density. |
| N | Use generalized density number N for both the one-electron integral derivatives and the corresponding 2PDM terms. |
IOp(7/13)
Contraction with two-particle density matrices.
| 0 | Default (same as 1). |
| 1 | Use HF 2PDM. |
| 2 | Use external 2PDM. |
| 3 | Use both HF and external 2PDM. |
| 4 | Generate 2PDM from CIS/TD square 1PDM (for debugging) |
| 5 | Generate 2PDM from CIS/TD square 1PDM and use HF/Z 2PDM as well. |
| 6 | Contract with external 2PDM derivatives. The types of derivatives are given by IOp(7/15). |
| 7 | Form derivative 2PDM from CIS and HF deriv. dens. matrices. IOp(7/15) gives types of derives. |
| 8 | Do TDA/TDnon-adiabatic coupling in addition to forces. Uses generaized density, does not compute ground-state or T*T force terms, and does the half-overlap term in L701. |
| 9 | Do only TDA/TD non-adiabatic coupling. |
| 10 | Do TDA/TD non-adiabatic coupling plus the gradients for both ground and excited states. |
| 11 | Do gradients for both ground and excited states but not the non-adiabatic coupling. |
| 1xx | Leave the external 2PDM on the disk instead of deleting it. |
2-5, 8 imply use of the generalized density in L701, while 6-7 imply use of gen. density derivatives in L701.
IOp(7/14)
State for CIS/TD derivatives; gradients. Defaults to 1. May be overridden by ILSW.
IOp(7/15)
The nature of the perturbation(s).
| 0 | Default (1st order nuclear and electric field). |
| IJK | Nuclear Kth order. Electric field Jth order. Magnetic field Ith order. |
| 1000 | Generate simulated density derivatives. |
Only 1, 10, and 11 are valid in overlay 7 (I is used in other overlays).
IOp(7/16)
Number of translations and rotations to remove during redundant coordinate transformations.
| -2 | 0. |
| -1 | Normal (6 or 5 for linear molecules). |
| 0 | Default, taken from ILSW. |
| N | N. |
IOp(7/18)
Derivative accuracy option.
| 0 | Compute to 10-8 accuracy. |
| 1 | Do as accurately as possible in L702. |
| 2 | Use the original ‘BERNY’ values in L702. |
| 10 | Do as accurately as possible in L703. |
| 20 | Use sleazier cutoffs in L703. |
| 100 | Do as accurately as possible in L708. |
| 200 | Use sleazier cutoffs in L708. |
IOp(7/19)
L703: Sets ICntrl for DFT.
| 0 | Default based on job. |
| 20000 | Added to default to use DBF logic for spherical atoms. |
| N | Use N+100/200 for 2nd/1st derivatives. |
IOp(7/25)
Type of derivatives available.
| 0 | First. |
| 1 | Second. |
| 2 | Third. |
| 10 | Read derivatives from checkpoint file (in input orientation). |
| 20 | Read almost all derivatives from chk file (in the input orientation), except take fd tensor derivatives from the rwf in the standard orientation. For the second step of Raman/ROA using mixed basis sets. |
| 30 | Same as 10, but set up for anharmonic differentiation. |
| 40 | Same as 30, but after VibFrq store derivs from chk file in file IOCPFX and leave derivs from the current job in the standard places. |
| 50 | Take just second derivatives from chk file (Opt=RCFC). |
| 100 | 3rd derivatives, DEDerv, D2FDPrp, DMag are Cartesian (numerical) derivatives (default). |
| 200 | 3rd derivatives, DEDerv, D2FDPrp, DMag are normal-mode (numerical) derivatives. |
IOp(7/28)
L703: Skip option to defer integral evaluation.
| 0 | Compute as normal. |
| 2 | Do all gradient integrals in L703. |
IOp(7/29)
L716: Mode of use.
| 0 | Normal, same as 2. |
| 1 | Normal + Generate estimated initial force constants. |
| 2 | Normal. |
| 6 | Nuclear repulsion only (useful for testing). |
IOp(7/30)
Use of symmetry in overlay 7.
| 0 | Use (subject to availability). |
| 1 | Don’t use. |
IOp(7/31)
Handling of forces contributions.
| 0 | Just use the forces in IRWFX. |
| 1 | Compute HF forces from D2E file & incr. both FX and FXYZ (non-O11 PSCF grad & HF freq). |
| 00 | Use FX in conversion of force constants to internal coordinates (analytic 2nd derivatives). |
| 10 | Use FXYZ in conversion of forces constants to internal cords (PSCF opt with HF 2nd deriv). |
IOp(7/32)
Punch option.
| 0 | None. |
| 1 | Punch energy in format D24.16, forces and lower triangular force constants in format 6F12.8. |
| 2 | Punch nuclear coordinate derivatives. Forces are punched in 3D20.12 format, one card per atom. Force constants and third derivatives are punched in 4E20.12 format in compressed form. |
| 3 | Punch energy, coordinates, and derivatives in Cartesians and redundant internals. |
| 4 | Punch energy, coordinates, and derivatives in redundant internals only in compressed form. |
| 5 | Punch energy, first and second derivatives in both Cartesian and internal coordinates. |
| 1x | Do punch only if second derivatives are available. |
| 1xx | Save results to baf or fchk. |
IOp(7/40)
Neglect of integrals.
| 0 | Keep all integrals. |
| 1 | Neglect four center integrals. |
IOp(7/41)
NDDO flag.
| 0 | Evaluate integrals correctly. |
| 1 | Apply NDDO approximation. |
IOp(7/42)
1PDM.
| 0 | Use SCF total density. |
| N | Use generalized density N. |
IOp(7/43)
2nd order simultaneous optimization flag.
| 0 | False. |
| 1 | True (other 2nd derivative options must also be set appropriately). |
| 2 | True (debugging option: compute fifth order WG and GG terms in L715). |
IOp(7/44)
Handling of an applied electric field.
| -1 | Do not add electric field terms or constraint terms to forces. |
| 0 | Update forces for a uniform electric field. |
| 1 | Update forces for the self-consistent reaction field (SCRF) method. |
| 2 | Update forces for a uniform electric field, with forces done the usual way for CIS or MP2 2nd derivatives. |
IOp(7/45)
Controlling the projection of the reaction path.
| 0 | Do not project. The point is a stationary point. |
| 1 | Project the reaction path and compute 3N-7 frequencies. |
| 2 | Project using the Newton-Raphson step. |
| 3 | Project using forces if the RMS force is larger than 1.d-3 atomic mass units. |
| 4 | Conical intersection seam, state 2. |
| 5 | Conical intersection seam, state 1. |
| 6 | Conical intersection seam, final processing. |
IOp(7/52)
L701: Whether ECP integrals should be done as usual.
| 0 | Yes. |
| 1 | No. |
IOp(7/53)
Convert forces over shells to field-dependent dipole and forces over atoms (for debugging).
| 0 | No. |
| 1 | Yes. |
| 10 | Compute optimimum lambdas. |
| N00 | Use optimization method N (default 8). |
IOp(7/60-62)
Override standard values of IRadAn, IRanWt, and IRanGd.
IOp(7/63)
Whether to do FMM.
| 0 | Use global default. |
| 1 | Turn off FMM here regardless. |
| 2 | Turn on FMM here if it is on elsewhere. |
| 3 | Turn on FMM here regardless. |
| 100 | Turn off FoFCou as well as FMM. |
IOp(7/64)
Type of simulated spectrum in output.
| 0 | Default (1). |
| 1 | Lines. |
| 2 | Lorentzians. |
| 3 | Both. |
IOp(7/70)
Do vibro-rotational analysis.
| 0 | Default (No). |
| 1 | Yes. |
| 2 | No. |
IOp(7/71)
Do vibrational 2nd order perturbation.
| 0 | No. |
| 1 | Yes. |
| 2 | Yes, initial point. |
| 10 | Do FC. |
| 20 | Do FCHT. |
| 30 | Do HT. |
| 100 | Do emission rather than absorption. |
IOp(7/72)
Read additional parameters for anharmonic computations.
| 0 | No. |
| 1 | Yes. |
| 2 | Read an input section specifying the normal modes to consider in the anharmonic calculation. |
| 3 | Read both. |
IOp(7/74)
Non-equilibrium PCM gradients.
| 0 | No. |
| 1 | Yes. |
IOp(7/75)
Threshold for printing redundant internal contributions to normal mode displacements.
| 0 | Default (10%). |
| N | 10-N. |
| -1 | Zero (all printed). |
The threshold is automatically lowered for each mode until 90% of the absolute displacements are included.
IOp(7/76)
L703: Override use of FoFCou.
| -1 | Same default choice as the rest of the program. |
| 0 | Defaults to 1. |
| 1 | Force FoFCou. |
| 2 | Prohibit FoFCou. |
IOp(7/77)
Debugging options for DBFs.
| 0 | Normal processing. |
| 1 | Omit subtraction and do P(Fit)*Jx*P. |
| 2 | Copy fit density over real density and do P(Fit)*Jx*P(Fit). |
| 3 | Turn off 1c logic for 1c DBF case. |
| 4 | Clear real density and do -1/2 P(Fit)*Jx*P(Fit). |
IOp(7/87)
Accuracy in FoFJK/CalDSu.
| 0 | Default, 10-10 for molecules, 10-12 for PBC. |
| N | 10-N. |
IOp(7/88)
Compression of output force constants.
| 4 | Force constants are stored over active atoms only. |
| 1000 | ONIOM-EE regular iterations, fold MM Hessian blocks into QM. |
All other values mean full storage here (default).
IOp(7/89)
IDoV for Harris gradient.
| 0 | Default (1). |
IOp(7/90)
Vibrational analysis for large systems.
| 0 | Do regular vibrational analysis. |
| -1 | Do full analysis, but exclude frozen atoms. |
| -2 | Do full analysis, but exclude frozen atoms, and only print the non-frozen atoms. |
| N | Compute N lowest modes. |
IOp(7/91)
Selection of particular normal modes for analysis.
| 0 | Default (1). |
| 1 | Show all normal modes. |
| 2 | Read input specifying how to select modes. |
| 3 | Show all modes, sorted by layer. |
| 4 | Show all modes which are primarily on the smallest model system. |
| 5 | Show all modes which are primarily on either model system in a 3-layer ONIOM. |
IOp(7/92)
Whether to save normal modes and intensities on disk, or read them from disk.
| 0 | Default (save unless reading). |
| 1 | Save. |
| 2 | Don’t Save. |
| 3 | Save selected modes. |
| 00 | Default (don’t read). |
| 10 | Read. |
| 20 | Don’t Read. |
IOp(7/93)
Whether to zero out derivatives with respect to frozen atoms.
| 0 | Default (1). |
| 1 | Yes. |
| 2 | No. |
| 3 | Check ICNUse. |
IOp(7/102)
Control of FMM for nuclear repulsion.
| 0 | Default: Use for 5K or more atoms. |
| N | Use for N or more atoms. |
| -1 | Always use FMM. |
| -2 | Never use FMM. |
IOp(7/120)
Store nuclear repulsion energy as total energy?
| 0 | Default (No). |
| 1 | Yes. |
IOp(7/121)
Read additional parameters for FCHT calculations:
| 0 | No. |
| 1 | Yes. |
| 2 | Read an input section specifying the normal modes to consider in the anharmonic calculation. |
| 3 | Read both. |
IOp(7/122)
Generation of G- in L716. (IAprBG in Red2BG).
IOp(7/123)
Print partitioning of ONIOM vibrational frequencies into contributions from individual sub-calculations. see Vreven et al. JCTC, 2012, DOI: 10.1021/ct300612m
| 0 | Don’t do ONIOM frequency analysis. |
| 1 | Do ONIOM frequency analysis. |
IOp(7/124)
Reserved for options for VibRot.
| 0 | No options. |
| 1 | Read options. |
IOp(7/125)
Mode of operation of L717:
| 0 | Default (1). |
| 1 | G25 defaults. |
| 2 | Pisa defaults. |
| 1x | Normal anharmonic calculation |
| 2x | Only Fijj and no 4th derivatives available. |
IOp(7/126)
Type of overlay 7, for printing:
| 0 | Default (1). |
| 1 | Normal derivative calculation. |
| 2 | Process integrated ONIOM or counterpoise derivatives. |
IOp(7/127)
Check on SCF convergence.
| 0 | Default (8). |
| -100 | No check. |
| N | 10-N. |
IOp(7/128)
Print of 3*NAtoms arrays:
| 0 | Default (1). |
| 1 | Do print. |
| 2 | Do not print. |
IOp(7/211-213)
Override standard values of IRadAn, IRanWt, and IRanGd for electron-nuclear XC.
