Overlay 8
Overlay 8
IOp(8/5)
Whether to pseudo-canonicalize ROHF orbitals.
| -2 | Yes, and save over canonical MOs setting ILSW for UHF. |
| -1 | Yes. |
| 0 | Default (Yes if ROHF). |
| 1 | No. |
IOp(8/6)
Bucket selection.
| 0 | Buckets for MP2: (IA/JB). |
| 1 | Buckets for stability: (IA/JB), (IJ/AB). |
| 2 | Buckets for CID or MP3: (IJ/AB), (IA/JB), (IJ/KL). |
| 3 | Buckets for semi-direct MP4DQ, CISD, QCISD, BD: (IJ/AB), (IA/JB), (IK/KL), (IJ/KA). |
| 4 | CISD or MP4SDQ or MP4SDTQ, but includes (IA/BC). |
| 5 | The complete set of transformed integrals. |
| 6 | Full transformation if this is consistent with MaxDisk, otherwise same as 3. |
| 7 | Full transformation if this is consistent with MaxDisk, otherwise same as 4. |
IOp(8/7)
Check SCF convergence.
| 0 | Default (8). |
| -100 | No check. |
| N | 10-N. |
IOp(8/8)
L811: Whether to delete MO integrals.
| 0 | Default (No). |
| 1 | Yes. |
| 2 | No. |
IOp(8/9)
L802: Debug control.
| 0 | Operate normally. |
| -N | Force N orbitals per pass. |
L804: Direct Transformation Control.
| 0 | Operate normally. |
| 1 | Generate and test RInt3 array (L804). |
| 2 | Accumulate MP2 force constant terms in direct fashion. |
| 3 | Write the MO basis first derivative ERI’s to disk. |
| 10 | Force fully in-Core algorithm (L804 only). |
| 20 | Force transformed integrals in Core algorithm. |
| 30 | Force semi-direct transformation. |
| 100 | Force output bucket in Core anti-symmetrization. |
| 200 | Force sorting for output bucks. |
| 1000 | Force semi-direct mode 1. |
| 2000 | Force semi-direct mode 2. |
| 3000 | Force semi-direct mode 3 if IOp(8/6)=3. |
| 4000 | Force semi-direct mode 4 if IOp(8/6)=3. |
| 00000 | Default (10000). |
| 10000 | Do not symmetry compress transformed integrals. |
| 20000 | Do symmetry compress transformed integrals (buckets) (This will cause windowed MOs, reordered in the order of representations like occ-rep1,occ-rep2,… virt-rep1,virt-rep2,… eigenvalues and symm. assignment vectors will be put in correspondence with vectors. VGZ). |
| 30000 | Symmetry compress transformed integrals only if RHF. (Upper triangle of symmetry compressed integrals for IOp(8/6)=5 or 4 only! (VGZ)). |
| 40000 | Store buckets of single-bar integrals, not symmetry compressed. |
| 100000 | Reorder MOs, eigenvalues and symmetry assignment vectors according to the representations. |
IOp(8/10)
Window is selected as follows:
| -N | Use the top N occupieds and lowest N virtuals. |
| 0 | Default, same as 4. |
| N | 1 ≤ N ≤ 89 selects frozen-core type N. For basis sets with double-zeta cores, core virtuals are also frozen. |
| 1 | The largest noble gas core is frozen. |
| 2 | G2 frozen-core: the largest noble gas core and main group d orbitals are frozen, except that the outer sp electrons of 3rd row and later alkali and alkali earth elements are retained. |
| 3 | The next to the largest noble gas core is frozen. |
| 4 | The largest noble gas core and main group d’s are frozen. |
| 5 | G3 frozen-core: the largest noble gas core is frozen, except that the outer sp electrons of 3rd row and later alkali and alkali earth elements are retained. |
| 6 | G4 frozen-core: the largest noble gas core is frozen, except that the outer sp electrons of 2nd row and later alkali and alkali earth elements are retained. |
| 7 | CBS-Wes core: noble gas except 3sp valence K-Zn, 3d valence Ga-As. |
| 30+M | Default to frozen-core type M (or full if M=0), but read an input section with the number of core orbitals for specified elements, overriding the default. |
| 88 | Apply a set of core sizes read from the RWF or CHK file, set from 92 or 93 if sizes are found. |
| 89 | Read a list of the number of core orbitals for each atom. |
| 90 | Use all MOs. |
| 91 | The window is specified by IOp(8/37-38). If IOp(8/37) is 0, a card is read in indicating the start and the end. A negative value for the end deletes the top virtuals. |
| 92 | The window is recovered from RWF 569. |
| 93 | The window is recovered from file 569 on the checkpoint file. |
| 94 | Read a list of orbitals to freeze. |
| 000 | Default (200). |
| 10x | Use orbital energies to choose core orbitals. |
| 20x | Use overlap with atomic core orbitals from Harris to choose core orbitals. |
| 30x | Use overlap with atomic core orbitals from Core Ham to choose core orbitals. |
| 1xxx | Read in a permutation of the full orbital set(s) to apply before applying the window. |
| NNxxx | Apply special permutation NN to the full orbital set. Refer to LstWin for details. |
IOp(8/11)
MO coefficient, orbital energy, and number of electrons test.
| 0 | Default, same as 2 except for during BD iterations or BD=Read. |
| 1 | Just print a warning message. |
| 2 | Kill the job if any MO coefficients are greater than 1000.0 or the smallest difference between occupied and virtual orbital energies is less than 0.001. Also, kill a frozen-core job if there is significant core-valence mixing in the canonical orbitals. |
| 00 | Default, same as 10. |
| 10 | Suppress such a test (CPHF may still be done for such a case). |
| 20 | Kill the job if there is no corr. energy; e.g., if there is only 1 electron or 1 virtual spin-orbital. |
IOp(8/12)
Calculation of frozen-core contributions.
| 0 | No. |
| 1 | Yes, using old code. Only works with conventional SCF and no integral symmetry and closed-shell. |
| 2 | Yes, using modern code, computing Ja+Jb-K for alpha and (if UHF) beta. The full HF correction is done even for DFT wavefunctions. |
| 3 | Same as 2, but the DFT XC and K are used. |
IOp(8/16)
L811: Maximum number of orbitals per pass (only if integral derivative file is being written). Default is as many as fit with Max Disk.
IOp(8/18)
L811: Which type of derivative transformation to do.
| 0 | Default, same as 3. |
| 1 | Non-canonical, Uij,x = -1/2 Sij,x. |
| 2 | Canonical, Uij,x = (Fij,x – EjSij,x) / (Ei-Ej) Note that this blows up for degenerate orbitals and is intended primarily for debugging. |
| 3 | Non-canonical, Uij,x = -1/2 Sij,x, except canonical in frozen-active blocks. |
| 4 | Non-canonical, Uij,x = -Sij,x Uji,x = 0. |
| 5 | Canonical occupieds, Uab,x = -Sab,x/2. |
| 6 | Canonical virtuals, Uij,x = -Sij,x/2. |
IOp(8/19)
L811: The nature of the perturbation(s).
| 0 | Default (1st order nuclear and electric field). |
| IJK | Nuclear Kth order. Electric field Jth order. Magnetic field Ith order. |
IOp(8/20)
L811: Which terms to include.
| 0 | Default (same as 11). |
| 1 | MO derivative times integral term. |
| 10 | MO times integral derivative term. |
IOp(8/21-22)
These options control the in-Core post-SCF link, L805.
IOp(8/23)
L811: Algorithm control.
| 00 | Default (32). |
| 1 | Unused. |
| 2 | Accumulate MP2 force constant terms in direct fashion. |
| 3 | Write the MO basis first derivative ERI’s to disk. |
| 20 | Force fully direct. |
| 30 | Force semi-direct. |
IOp(8/24)
Whether to try to transform old amplitudes on the checkpoint file.
| 0 | Default: 1 if doing BD=Read and amplitudes are present; 2 otherwise. |
| 1 | Yes. |
| 2 | No. |
| 3 | Just set up transformation in l801. |
| 10 | Transform Z-amplitudes as well. |
| 20 | Do not transform Z-amplitudes as well. |
| 000 | Default, transform EOM amplitudes if transforming ground-state ones. |
| 100 | Transform EOM amplitudes. |
| 200 | Do not transform EOM amplitudes. |
IOp(8/28)
Hack number of occupieds for full ci using links L921 or L922.
| -1 | Transform all orbitals (after freezing Core) as occupieds (i.e., set NOA=NOB=NROrb in transformation). |
| 0 | No. |
| N | Transform N orbitals (after frozen Core) as occupieds (i.e., set NOA=NOB=N for purposes of transformation). |
IOp(8/29)
Maximum number of perturbations per batch in L811 (only applies if integral deriv file is written)
| -3 | Do not use batching logic. |
| -2 | Do as many in a batch as can be overlapped with sorting space for half transformed integrals. |
| -1 | Do one batch, but use multi-batch logic. |
| 0 | Default (same as 1). |
| 1 | Do a single atom at a time (minimum disk usage). |
| N | N triplets. |
L811: Requested diskusage. This will determine the number of times AO integrals and derivatives are evaluated unless overridden by IOp(8/31). This only applies if the integral derivatives are not stored.
| -3 | Use as much as desired, independent of MAXDISK. |
| -2 | Use an amount which is similar to the maximum disk usage in other parts of the MP2 freq. code. |
| -1 | Use as much as needed for maximum efficiency, subject to the limit imposed by MAXDISK. |
| 0 | Default (-1). |
| N | N evaluations and hence N coarse tiled batches (1…6 are the currently implemented options). |
IOp(8/30)
Type of window.
| 0 | Default. Set up /Orb/ as indicated by IOp(8/10). |
| 1 | Test window. Set up for full but zero core MOs. |
| -1 | Set up /Orb/ for a full window but then blank the wavefunction coefficients in L804. |
IOp(8/32)
Whether to do CI in the interacting space only.
| 0 | Default (all spin-eigenfunctions). |
| 1 | All. |
| 2 | Interacting only. |
IOp(8/36)
Whether to update force constants with the MP2 product of MP2 integral derivatives term (only applies if integral derivative file is not written).
| 0 | Default (Yes). |
| 1 | Yes. |
| 2 | No. |
| 00 | Default on whether to make Poo and Pvv for MP2. (Yes if Ix is not stored, no otherwise). |
| 10 | Yes. |
| 20 | No. |
IOp(8/37)
Integer specifying first window parameter (n).
IOp(8/38)
Integer specifying second window parameter (m).
IOp(8/39)
Localized orbital method adopted in SAC/SAC-CI.
| 0 | Default. No localization. |
| 1 | Boys method. |
| 2 | Population method. |
| 3 | Boys + population method. |
IOp(8/40)
Handling of ROHF window.
| 0 | Default (1 if IOp(8/5)=1, otherwise 2). |
| 1 | Treat as RHF, transforming only alpha orbitals. |
| 2 | Use ROMP2 approach, forming pseudo-canonical alpha and beta orbitals and doing UHF transformation. |
IOp(8/41)
Transformation of spin-orbitals (alpha only) within occupied and unoccupied orbital subspaces by minimum orbital-deformation (MOD) method.
| 0 | Default. No. |
| 1 | No, but save MOs. |
| 2 | Yes. Take reference MOs from disk if available. |
| 3 | No for the 1st geometry of opt, yes otherwise. |
IOp(8/42)
Whether to reorder MOs during potential surface exploration.
| 0 | No. |
| 1 | Yes. |
| 2 | Yes (for SAC-CI single point calculation). |
| 00 | Use orbital energies in ordering. |
| 10 | Don’t use orbital energies in ordering. |
| 000 | Use second moments in ordering. |
| 100 | Don’t use second moments in ordering. |
| 0000 | Use dipole moments in ordering. |
| 1000 | Don’t use dipole moments in ordering. |
IOp(8/43)
Number of Laplace points to use.
| N | Use N points for MP2. |
| -N | Use N points and set up for band gap correction. |
IOp(8/45)
Type of quasiparticle job.
| 0 | Band gap. |
| -1 | Ionization potential. |
| 1 | Electron affinity. |
| -N | Nth occupied band at the k-point for which the HOCO is highest (by default) or at k-point specified by IOp(44). |
| N | Nth virtual band at the k-point for which the LUCO is lowest (by default) or at k-point specified by IOp(44) |
IOp(8/46)
Indicates special case of non-HF calculation.
| 0 | Default – MOs are canonical HF orbitals. |
| 1 | Input orbitals are not canonical HF and pseudo-canonical orbitals must be generated here for the post-SCF. |
| 10 | Generate HF pseudo-canonical even if the original SCF method was not (i.e., Kohn-Sham). |
| 20 | Same as 10, but update SCF energies in Gen. |
IOp(8/47)
Whether L804/L811 should generate results compressed over active atoms.
| 0 | Default (2). |
| 1 | Active atoms. |
| 2 | Full list. |
| 3 | Full list, but blank contributions from inactive atoms (no difference from 2 for overlay 8). |
| 4 | Active atoms, and store Hessian contributions over active atoms only. |
IOp(8/60-62)
Over-ride standard values of IRadAn, IRanWt, and IRanGd. For DFTCV, IRadAn defaults to 299974 rather than the global default.
IOp(8/68)
EOM-CCSD
| 0 | No EOM. |
| 1 | Do EOM-EE with the default algorithm (right and left spaces separately) |
| 2 | Do EOM-IP |
| 10 | Do EOM doing only the transition energy (right space) expansion space for both. |
| 20 | Do EOM doing right and left eigenvectors using the same expansion space for both. |
| 30 | Do EOM doing right and left eigenvectors using biorthogonal expansion spaces. |
| 100 | This overlay 8 is just to set up for l914 guess. |
| N000 | Do N ionizations or attachments, default N=1 (only IP avail.) |
IOp(8/69)
EOM: Number of states per irreducible representation (largest Abelian subgroup) to do.
| 0 | Default (2). |
| N | N per irreducible representation. |
| -1 | Read the number for each irreducible representation, all from one line. |
| -2 | Later point of optimization or freq=numer, reuse CIS data as well as number of states per irrep. |
| -3 | First point, read data from chk file. |
The order of irreducible representations is the same as printed for symmetry-adapted basis functions by L301.
IOp(8/87)
Accuracy of integrals.
| 0 | Default (12). |
| N | 10-N. |
IOp(8/105)
Convergence of amplitudes for EOM iterations.
| 0 | Default (1.d-5). |
| N | 10-N. |
IOp(8/106)
Number of EOM states for LR transition densities.
| 0 | Default (None). |
| -1 | All. |
| N | First N of each symmetry. |
IOp(8/107)
EOM state of most interest.
| 0 | Default (1st excited state). |
| N | Nthexcited state. |
IOp(8/108)
EOM-CCSD: Total number of states to do. Guesses are taken from the checkpoint file if RdAmp was specified, with remaining states taken from the CIS guess in CIS energy order.
| 0 | Default (2*NIrrep) |
IOp(8/109)
IFact for Davidson in EOM-CC.
IOp(8/110)
State-to-State transition dipoles in EOM-CC:
| 0 | None. |
| 1 | From state NRoot to higher states. |
| 2 | From state NRoot to higher and lower states. |
IOp(8/111)
MaxIt for EOM.
IOp(8/112)
MaxMin for EOM.
IOp(8/113)
WhenSc for EOM.
IOp(8/114)
IRdLft for EOM.
IOp(8/115)
IFirst for EOM.
IOp(8/116)
Compute DFT estimate of core-core and core-valence correlation?
| 0 | Default. |
| 1 | Yes. |
| 2 | No. |
| 10 | Include empirical corrections for total energies. |
| 20 | Do not include empirical corrections. |
The default is not to compute the correction, and if the correction is requested, to include the total energy terms only for CBS-Wes style frozen-core (the only case for which they have been determined). Corrections are only included for elements H-Ar.
IOp(8/123)
Flag for SOS in EOM.
IOp(8/124)
Whether to fix the phase of the windowed MOs.
| 0 | Default (1 unless doing numerical differentiation with saved central-point MOs or doing MOD). |
| 1 | Yes. |
| 2 | No. |
IOp(8/125)
Threshold for singular values in generating the transformation between old and new MOs for reading amplitudes.
| 0 | Default (0.9) |
| NNNNNN | NNNNNNx10-6. |
