[wonderplugin_tab_content]
Description
The Geom keyword specifies the source of the molecule specification input, options related to coordinate definitions, and geometry-related output. By default, it is read from the input stream, as described previously. Geom may be used to specify an alternate input source. It also controls what geometry-related information is printed and use of internal consistency checks on the Z-matrix. The Geom keyword is not meaningful without at least one item selection option.
Gaussian supports generalized internal coordinates (GIC), a facility which allows arbitrary redundant internal coordinates to be defined and used for optimization constraints and other purposes [Marenich25]. There are several GIC-related options to Geom, and the GIC Info subsection describes using GICs as well as their limitations in the present implementation.
[/wonderplugin_tab_content]
[wonderplugin_tab_content]
Options
Geometry Retrieval Options
Checkpoint
Take the molecule specification (including variables) from the checkpoint file. Only the charge and multiplicity are read from the input stream. For example, Geom=Checkpoint may be used by a later job step to retrieve the geometry optimized during an earlier job step from the checkpoint file. Checkpoint may be combined with the ModRedundant option or with the AddGIC option if you want to retrieve and alter the molecule specification in a checkpoint file using internal coordinate-style modifications. Note that Geom=(Checkpoint,ModRedundant,GIC) is equivalent to Geom=(Checkpoint, AddGIC). The Geom=(Checkpoint,GIC) option (i.e., without ModRedundant) will not use the GICs from the checkpoint file, but instead, it will build a new set of GICs automatically based on the current molecular specification (e.g., Cartesian coordinates) from the checkpoint file. The Geom=(Checkpoint,ReadAllGIC) option will not use the GICs from the checkpoint file, but instead, it will read a new set of GICs from the input file and calculate their values based on the current molecular specification (e.g., Cartesian coordinates) from the checkpoint file. Note that Geom=(Checkpoint,GIC) is equivalent to Geom=Checkpoint Opt=GIC, and Geom=(Checkpoint, ReadAllGIC) is equivalent to Geom=Checkpoint Opt=ReadAllGIC.
AllCheck
Take the molecule specification (including variables), the charge and multiplicity, and the title section from the checkpoint file. Thus, only the route section and any input required by keywords within it need be specified when using this option. This option is not valid with Modify but may be combined with ModRedundant, GIC, or AddGIC in the same way as the Checkpoint option.
Step=N
This option retrieves the structure produced by the Nth step of a failed or partial geometry optimization (it is not valid for a successful optimization). Step=Original recovers the initial starting geometry. This option is used for restarting geometry optimization from intermediate points. It must be combined with one of Checkpoint, AllCheck, or Modify. Note that not all steps are always present in the checkpoint file; a Hessian updated message in the log file means that the corresponding step is available in the checkpoint file. NGeom=N retrieves the Nth geometry from an optimization checkpoint file using the same record of points used for display in GaussView, where N=1 corresponds to the input molecule specification. Geom=Step=M is automatically converted to Geom=NGeom=M+1 if the previous optimization used redundant internal coordinates.
Modify
Note that this option refers to modification specifications for geometry optimizations using Z-matrix coordinates only. In general, it is deprecated in favor of ModRedundant. It should not be used with GICs. Use Geom=(Checkpoint,AddGIC) instead of Geom=Modify if you want to modify the generalized internal coordinates.
This option specifies that the geometry is to be taken from the checkpoint file and that modifications will be made to it. A total of two input sections will be read: the first contains the charge and multiplicity, and the second contains alterations to the retrieved geometry.
Modification specifications for geometry optimizations using Z-matrix coordinates have the following form:
variable [new-value] [A|F|D]
where variable is the name of a variable in the molecule specification, new-value is an optional new value to be assigned to it, and the final item is a one-letter code indicating whether the variable is to be active (i.e., optimized) or frozen; the code letter D requests numerical differentiation be performed with respect to that variable and activates the variable automatically. If the code letter is omitted, then the variable’s status remains the same as it was in the original molecule specification.
Geometry Specification & Modification Options
ModRedundant
Except for any case when it is combined with the GIC option (see below), the ModRedundant option will add, delete, or modify redundant internal coordinate definitions (including scan and constraint information) before performing the calculation. This option requires a separate input section following the geometry specification. AddRedundant is synonymous with ModRedundant.
This option may be used for job types other than optimizations. It may also be combined with NGeom, Check or AllCheck to retrieve and modify an internal coordinate definition from a checkpoint file.
When used with Check, or NGeom, two input sections will be read: the first contains the charge and multiplicity, and the second contains alterations to the retrieved internal coordinate definition. When combined with the AllCheck option, only the internal coordinate definition modifications input is needed.
[insert page=’modred’ display=’content’]
See the examples under the Opt keyword for illustrations of the use of ModRedundant.
NewDefinition
Generate a new set of redundant internal coordinates, replacing any that were in the checkpoint file. This option should not be used with GICs; use Geom=(Checkpoint,GIC) instead.
SkipAll
Do not generate any internal coordinates automatically. In the case of redundant internal coordinates based on the old algorithm available in Gaussian 09, all of the required coordinates must be explicitly specified in the ModRedundant input section. In the case of GIC-type internal coordinates based on the new GIC algorithm, you should use Geom=ReadAllGIC instead of this option.
SkipAng
Generates bonds but omits angles and dihedrals.
SkipDihedral
Suppresses the generation of dihedrals.
SkipHBond
Skips generation of hydrogen-bond coordinates.
KeepConstants
KeepConstants retains and NoKeepConstants discards information about frozen variables. The default is to retain them in symbolic form for the Berny algorithm and to discard them for older optimization algorithms (which don’t understand them anyway).
NewRedundant
Rebuilds the redundant internal coordinates from the current Cartesian coordinates. If used with Geom=Modify, the new modifications are appended to any earlier Opt=ModRedundant input before the coordinate system is updated. This option should not be used with GICs; use GIC or AddGIC instead (as appropriate).
Redundant
Build an automatic set of redundant internal coordinates such as bonds, angles, and dihedrals from the current Cartesian coordinates or Z-Matrix values, using the old algorithm available in Gaussian 09.
UseStandardOrientation
Use the coordinates in the standard orientation from the checkpoint file as the input orientation for the new job when using Geom=AllCheck.
Specifying Connectivity
Connectivity
Specify explicit atom bonding data via an additional input section (blank line-terminated) following the geometry specification and any modification to it. This option requires one line of input per atom, ordered the same as in the molecule specification, using the following syntax:
M N1 Order1 [N2 Order2 …]
where M is the atom number, the ‘N‘s are atoms to which the current atom is bonded, and the ‘Order‘s are the bond order of the corresponding bond. For example, this input specifies that the current atom is bonded to atoms 4 and 5, with bond orders of 1.0 and 2.0 respectively:
8 4 1.0 5 2.0
A bond order of 0.1 indicates a bond which should be used in generating internal coordinates but which should not affect atom types or connectivity for molecular mechanics.
This input section is terminated by a blank line.
ModConnectivity
Modify the connectivity of the atoms in the molecule specification (or retrieved from the checkpoint file). This option requires an additional input section (blank line-terminated) following the geometry specification and any modification to it. Connectivity modifications use the following syntax:
M N1 Order1 [N2 Order2 …]
where M is the atom number, the ‘N‘s are atoms to which that atom is bonded, and the ‘Order‘s are the bond order of the corresponding bond. A bond order of -1.0 removes a bond. For example, this input specifies that atom 8 is bonded to atoms 4 and 5, with bond orders of 1.0 and 2.0 respectively, and removes any bond to atom 9:
8 4 1.0 5 2.0 9 -1
This input section is terminated by a blank line.
GenConnectivity
Recompute connectivity rather than using the information in the checkpoint file when using Geom=AllCheck.
ZMConnectivity
Read connectivity using the atom numbering specified in the Z-matrix (including dummy atoms). Bond orders involving dummy atoms are discarded.
Applying Harmonic Constraints
IHarmonic=n
Add harmonic constraints to the initial structure with force constant n/1000000 Hartree/Bohr2. InitialHarmonic is a synonym for this option.
ChkHarmonic=n
Add harmonic constraints to the initial structure saved on the checkpoint file with force constant n/1000000 Hartree/Bohr2. CHarmonic is a synonym for this option.
ReadHarmonic=n
Add harmonic constraints to an additional structure read in the input stream (in the input orientation), with force constant n/1000000 Hartree/Bohr2. RHarmonic is a synonym for this option.
Specifying the List of Atoms to be Optimized
ReadOptimize
Read an input section modifying which atoms are to be optimized. The atom list is specified in a separate input section (terminated by a blank line). By default, the atom list contains all atoms in the molecule, unless any atoms are designated as frozen within the molecule specification, in which case the initial atom list excludes them. If the structure is being read in from the checkpoint file, then the list of atoms to be optimized matches that in the checkpoint file. ReadOpt and RdOpt are synonyms for this option. ReadFreeze and RdFreeze are deprecated synonyms.
The input section uses the following format:
atoms=list [notatoms=list]
where each list is a comma- or space-separated list of atom numbers, atom number ranges, and/or atom types. Keywords are applied in succession. Here are some examples:
| atoms=3-6,17 notatoms=5 | Adds atoms 3,4,6,17 to atom list. Removes 5 if present. |
| atoms=3 C 18-30 notatoms=H | Adds all C & non-H among atoms 3, 18-30. |
| atoms=C N notatoms=5 | Adds all C and N atoms except atom 5. |
| atoms=1-5 notatoms=H atoms=8-10 | Adds atoms 8-10 and non-hydrogens among atoms 1-5, |
Bare integers without a keyword are interpreted as atom numbers:
| 1,3,5 7 | Adds atoms 1, 3, 5 and 7. |
You can start from an empty atom list by placing noatoms as the first item in the input section. For example, the following input optimizes all non-hydrogen atoms within atoms 1-100 and freezes all other atoms in the molecule:
noatoms atoms=1-100 notatoms=H
The keyword allatoms similarly specifies all atoms within the molecule.
For ONIOM optimizations only, block and notblock can be similarly used to include/not include rigid blocks defined in ONIOM molecule specifications. If there are contradictions between atoms specified as atoms and within blocks—e.g., an atom is included within a block but excluded by atom type—Gaussian generates an error.
Atoms can also be specified by ONIOM layer via the [not]layer keywords, which accept these values: real for the real system, model for the model system in a 2-layer ONIOM, middle for the middle layer in a 3-layer ONIOM, and small for the model layer of a 3-layer ONIOM. Atoms may be similarly included/excluded by residue with residue and notresidue, which accept lists of residue names. Both keyword pairs function as shorthand forms for atom lists.
Micro
Set up redundant internal coordinates for ONIOM(MO:MM) microiterations, even if this is not an optimization.
Output-Related Options
Distance
This option requests printing of the atomic distance matrix (which is the default for molecules with fewer than 50 atoms). NoDistance suppresses this output.
CAngle
This option requests printing of interatomic angles using distance cutoffs to determine “bonded atoms”. The default is not to print (NoAngle). Angle requests printing of the interatomic angles for Opt=Z-matrix (using the Z-matrix to determine which atoms are bonded). Only one of CAngle, Angle, and NoAngle may be specified.
CDihedral
This option requests printing of dihedral angles using distance cutoffs to determine “connectivity”. The default is not to print (NoDihedral). Dihedral specifies printing of dihedral angles for Opt=Z-matrix (using connectivity information from the Z-matrix to decide which atoms are bonded). Only one of CDihedral, Dihedral, and NoDihedral may be specified.
PrintInputOrient
This option includes the table giving the Cartesian coordinates in the input orientation within the output file.
This option turns on additional printing by the model builder facility.
Generalized Internal Coordinate (GIC)-Related Options
GIC
This option builds an automatic set of GIC-type internal coordinates instead of the default. The option NoGIC builds the internal coordinates of [Peng96] as in Gaussian 09, and it is the default. The GIC-type coordinates generated by the GIC option are essentially the same as those generated by default.
AddGIC
This option adds, deletes, or modifies the GIC-type internal coordinate definitions generated automatically or retrieved from the checkpoint file. This option requires a separate GIC input section following the geometry specification. The syntax of the GIC input section is described in GIC Info tab. Note that Geom=(ModRedundant,GIC) is equivalent to Geom=AddGIC.
DefaultGIC
Make GICs the default (for use in a Default.Route file).
DefaultNoGIC
Make Peng internal coordinates the default (for use in a Default.Route, but this is the default anyway).
GICOld
Build the default set of redundant internal coordinates of [Peng96] as in Gaussian 09, and then convert the coordinates into GIC-type internal coordinate definitions.
ReadAllGIC
Do not build any redundant internal coordinates by default. Instead, read the input stream for user-provided GIC definitions and create the coordinates. This option requires a separate GIC input section following the geometry specification. The syntax of the GIC input section is described in GIC Info.
Geometry Checking Options
Crowd
Crowd activates and NoCrowd turns off a check that aborts the job if atoms are closer than 0.5 Å. By default, the check is performed for every read-in geometry. It is not performed by default for later points of geometry optimizations, numerical frequencies, etc., when the geometry has been generated during the job. NoTest skips the test entirely.
Independent
Independent activates and NoIndependent turns off a check on the linear independence of the variables specified in a Z-matrix. This is done by default only if a full optimization is requested using the Berny algorithm (Opt=Z-matrix).
Other Options
Huge
Changes various defaults for huge (>20K atom) systems. Currently, this sets Geom=NoTest and Symm=None.
[/wonderplugin_tab_content]
[wonderplugin_tab_content]
Related Keywords
[/wonderplugin_tab_content]
[wonderplugin_tab_content]
GIC Considerations
The options that do not mention GIC and can be used with the Geom keyword should work as described—except for NewDefinition and NewRedundant. The latter should not be combined with any GIC-related option. In the case of GICs, you should use Geom=(Checkpoint,GIC) instead of Geom=NewDefinition, Geom=GIC instead of Geom=NewRedundant, and Geom=(Checkpoint,addGIC) instead of Geom=(Modify,NewRedundant).
[insert page=’gic’ display=’content’]
See General Internal Coordinates for more information on GICs.
[/wonderplugin_tab_content]
[/wonderplugin_tab_content]
[/wonderplugin_tabs]
Last updated on: 23 July 2019.
