Overlay 4
Overlay 4
IOp(4/5)
Type of guess.
| 0 | Default. This uses the Harris functional except for semi-empirical, for which the modified core Hamiltonian is diagonalized. |
| -1 | Skip out and leave all files as left over on the rwf from whatever was done previously. |
| 1 | Read guess from the checkpoint file. |
| 2 | Guessfrom model Hamiltonian, chosen via IOp(4/11). |
| 3 | Huckel guess (only valid for NDDO-type methods). |
| 4 | Projected ZDO guess. |
| 5 | Renormalize and orthogonalize the coefficients which are on the read-write files. This is normally converted to IGuess=1 (read from chk) in order to pick up the basis set and coordinate corresponding to the old orbitals. |
| 6 | Renormalize and orthogonalize intermediate SCF results which are on the RWF. |
| 7 | Read intermediate SCF results which are on the checkpoint file. |
| 8 | Read the generalized density specified by IOp(4/38) from the checkpoint file and generate natural orbitals from it. |
| 9 | Read the generalized density specified by IOp(4/38) from the RWF file and generate natural orbitals from it. |
| 10-14 | Generated internally and correspond to 0 and 5-8 for sparse. |
| 16 | Use the orthonormal set provided by L302 as MOs, avoiding any diagonalization. |
| 17 | Store unit matrices for a dummy guess. |
| 18 | Copy orbitals and densities that are in the chk file without checking or alteration. |
| 100 | Convert Guess=Check to Guess=Restart or to generating guess depending on what if anything is on the checkpoint file. |
| 1000 | Use the simultaneous optimization recipe: S-0.5* V. |
| 00000 | Default (1 for PBC without alter, otherwise 2). |
| 10000 | Re-use Fock matrices instead of orbitals. |
| 20000 | Re-use orbitals not Fock matrices. |
| 100000 | Read the name of a checkpoint file from the input stream and read guess MOs from it, or read an option for how to generate the guess. |
Note that variable IGuess here has 4,3,2,1 corresponding to 1,2,3,4 above. IGuess values of 10-14 are generatedinternally and are the sparse versions of 0 and 5-8.
IOp(4/6)
L401: Projection, orthogonalization, and checking of initial guess.
| 0 | Default (1 except 3 for IOp(129)=1). |
| 1 | Force projected read-in guess, even when bases are identical. |
| 2 | Suppress projection. |
| 3 | Project only if basis sets are different. |
| 00 | Default orthogonalization (perform if Guess=Cards). |
| 10 | Schmidt orthogonalize guess orbitals. |
| 20 | Suppress orthogonalization. |
| 000 | Default MO checking (check if Guess=Cards or Guess=Mix). |
| 100 | Check MOs for othornormality. |
| 200 | Don’t check MOs for othornormality. |
| 100000000 | Default all 3 to on |
| 200000000 | Default all 3 to off. |
IOp(4/8)
L401: Alteration of configuration.
| 0 | Default (3). |
| 1 | Read in pairs of integers in free format indicating which pairs of MO’s are to be interchanged. Pairs are read until a blank card is encountered. |
| 2 | Read in a permutation of the orbitals. |
| 3 | Do not alter configuration. |
| 10 | Read alteration information from the read-write file. |
| 100 | Use alpha orbitals for guess for both alpha and beta. |
| 1000 | Biorthogonalize UHF MOs. |
Note: If the configuration is altered on an open shell system, two sets of data as described above will be expected, first for alpha, second for beta.
IOp(4/9)
L401: SCF symmetry control.
| 0 | Default, same as 104 except 4 for IGuess=16, and 204 if C1 symmetry. |
| 1 | Read groups of irreducible representations to combine in the SCF. These are read before any orbitals and before alteration commands. |
| 2 | Use no symmetry in the SCF. |
| 3 | Pick up the symmetry mixing information from the alteration read-write file. |
| 4 | Use the full Abelian point group, as represented by the symmetry adapted basis functions produced by link 301. Initial guess orbital symmetries are assigned. |
| 5 | (Use symmetry in SCF if possible, but do not assign initial guess Abelian symmetries). |
| 10 | Localize all occupied orbitals together and all virtual orbitals together. |
| 20 | Localize the orbitals within the selected or defaulted symmetry. |
| 30 | Localize all occupied and virtual orbitals together. |
| 40 | Do not localize. |
| 100 | Assign orbital symmetries for printing in full symmetry. |
| 200 | Do not assign orbital symmetries in full symmetry. |
| 1000 | Force the guess orbitals to have the Abelian symmetry. |
| NN0000 | Use localization method NN-1 (see LocMO). |
This option can cause the symmetry adapted basis function common blocks to be modified.
L401: Whether to print guess.
| 0 | Default (no unless IOp(33)≥2). |
| 1 | Yes. |
IOp(4/11)
L401: Type of Guess.
For iterative ZDO Guess:
| -1 | Force old path using old Huckel. |
| 0 | Best available (8,4 in order of preference). |
| 1 | Old Huckel. |
| 2 | CNDO. |
| 3 | INDO. |
| 4 | New Huckel. |
| 5 | Iterative extended Huckel. |
| 6 | Harris, converted to IGuess=3 and IZDO=3 here. |
| 7 | Harris with interpolated QEq atomic charges, converted to IGuess=3 IZDO=5 here. |
| 8 | Harris with new densities. |
| 9 | Iterated Harris with QEq guess, converted to IGuess=3 IZDO=7. |
| 10 | Unused. |
| 11 | NYI? Harris using charges from previous SCF, converted to IGuess=3 IZDO=9. |
For unprojected single diagonalization guess:
| 0 | Default(1 for DFTB, 2 for AM1/PM6, 3 for ab initio). |
| 1 | Use bare core matrix. |
| 2 | Dress core Hamiltonian with QEq-based density. |
| 3 | Use Harris Functional with old densities. |
| 4 | Neutral atom AM1/PMx guess. |
| 5 | Harris functional with interpolated QEq charges. |
| 6 | Harris functional with iterated charges. |
| 7 | Harris functional with iterated charges starting from QEq. |
| 8 | Use Harris Functional with new densities. |
| 9 | Harris using charges from previous SCF |
| 000 | Default, same as 2. |
| 100 | Use at least SG1 in Harris guess. |
| 200 | Use at least FineGrid in Harris guess. |
| 300 | Use at least UltraFine in Harris guess. |
| 400 | Use an unpruned (199,590) or (399,590) grid depending on the range of primitive exponents.. |
| 500 | Use(399,974) and 10-12 in Harris functional. |
| 1000 | Save energy in Gen(43) for Harris functional. |
| MMMM00000 | Use functional MMMM. |
IOp(4/13)
L401: Mixing of orbitals.
| -2 | No mixing. |
| -1 | Mix HOMO and LUMO (skipping beta high-spin orbitals for GHF). |
| 0 | Default: Mix HOMO and LUMO to make complex guess for CRHF and CUHF if generating RUHF guess, otherwise do nothing. |
| >0 | Bits request actions as follows: |
| 0: Mix HOMO and LUMO (skipping beta high-spin virtuals for GHF), done after complex/spin mixings. | |
| 1: Do complex mixing, changing spin direction for GHF. | |
| 2: Use real rather than imaginary coefficients. | |
| 3: Flip sign of complex mixing. | |
| 4: Read in a spin-vector and rotate to align the spin vector ( | |
| 5: Read in two spin-vectors (or two axes and angles) and use them for alternate orbitals. | |
| 6: Reverse rotation direction applied to spin. | |
| 7: Read an axis and an angle (in deg) and perform the corresponding rotation in spin-space. | |
| Note that this will usually destroy both spatial and alpha/beta symmetry. The mixing is done after any alterations. Bits 1-3 are only relevant for complex wfns. |
IOp(4/14)
L401: Reading of specific orbitals.
| 0 | No. |
| 1 | Yes. For alpha orbitals, read one card with the format for the orbitals, followed by zero or more sets of IVec (I5): vector to replace. If IVec is -1, all NBasis vectors follow.(Vector(I), I=1, NBasis): vector in the specified format. Input is terminated by IVec=0. For b orbitals, the same format as for a is used. Note that if Alter is also specified, the replacements are read before the corr. alterations (thus the order is a orbitals, a alterations, b orbitals, b alterations). |
| 2 | Yes. Read using the format described in Routine RdMO2. Here a range of MOs is indicated by two integers followed by an integer giving the number of basis functions. Then a list of MO energies are given. Lastly, the MO coefficients are read in sequence. All of the reading is carried out in free format. |
| 3 | Read in a format, followed by all orbitals with a line that is ignored between orbitals. |
| 10 | Orbitals are assumed to have mixed normalization for Cartesian d and higher functions (equivalent to having AdjMO applied to them). |
| 100 | Reorder d and f coefficients from the order used in NWChem (as of January 2013) to the conventional order used in Gaussian, and reorder pure functions from -m…+m order to Gaussian (0,+1,-1,…) order |
| 900 | Read permutation arrays for p and higher functions for use in reordering read-in MO coefficients. (NYI) |
IOp(4/15)
L401: Spin-state for initial guess.
| 0 | Use multiplicity in /Mol/. |
| N | Use multiplicity N. Useful for generating guesses for open-shell singlets or unusual spin states involving orthogonal orbs by treating them as high-spin in the guess (which only does UHF). |
IOp(4/16)
L401: Whether to translate basis functions of read in guess.
| 0 | Default (same as 3). |
| 1 | Use the basis functions as is. |
| 2 | Translate to the current atomic coordinates. |
| 3 | Translate to the current atomic coordinates, and determine an overall rotation to provide to the read-in orbitals. |
IOp(4/17)
L402: Number of open-shell orbitals (not electrons).
| 0 | Number of open electrons. |
| N | N. |
L405: Number of electrons in the CAS space.
IOp(4/18)
L402: Number of orbitals in CI. Default is number of open shells.
Number of orbitals in the CAS space.
IOp(4/19)
L402: Spin change in CI (default based on multiplicity).
L405: Truncation level for excitations — default full CAS.
IOp(4/20)
L402: Type of model. (This is also tested in L401 to see whether atomic numbers greater than 102 are special flags).
| 0 | Default (AM1). |
| 1 | CNDO. |
| 2 | INDO. |
| 3 | MINDO/3. |
| 4 | MNDO. |
| 5 | AM1. |
| 6 | Unused. |
| 7 | PM3. |
| 8 | PM3 with mechanics correction. |
| 9 | Dreiding mechanics. |
| 10 | UFF mechanics. |
| 11 | AMBER mechanics. |
| 12 | MM2 mechanics. |
| 13 | MM3 mechanics. |
| 14 | Extended Huckel, Hoffmann parameters. |
| 15 | Extended Huckel, Muller parameters. |
| 16 | Extended Huckel, Initial guess parameters. |
| 17 | External program. |
| 18 | MMFF. |
| 19 | QFF. |
| 20 | Amoeba. |
IOp(4/21)
L402: SCF type.
| 0 | Default (no Pulay, no Camp-King, 3/4 point on unless Pulay or Camp-King, use pseudo-diagonalization). |
| 1 | 3/4. |
| 2 | No 3/4. |
| 10 | No Pulay (DIIS). |
| 20 | Pulay. |
| 100 | No Camp-King. |
| 200 | Camp-King. |
| 1000 | Use pseudo-diagonalization. |
| 2000 | No pseudo-diagonalization. |
L405: Flags for MCSCF.
| 1 | Read options from input stream. |
| 10 | Use Slater determinants. |
| 100 | Just list configurations. |
| 1000 | Use determinant basis with Sz=b/2. |
| 10000 | Write unformatted file (NDATA) of symbolic matrix elements. |
| 100000 | Write formatted file of symbolic matrix elements. |
IOp(4/22)
L402: Derivatives to do:
| 0 | None. |
| 1 | 1st derivatives. |
| 2 | 2nd derivatives. |
| 12 | Restart 2nd derivatives. |
| 100 | Do 1st derivatives analytically if possible. |
IOp(4/23)
L402: Number of iterations.
| 0 | Default. |
| N | N. |
L405: NDiag.
IOp(4/24)
L402: Whether to update orbitals, eigenvalues, /Mol/, and ILSW on the RWF.
| 0 | Default (don’t update). |
| 1 | Update, multiplying by S-1/2. |
| 2 | Don’t update. (For Opt=MNDOFC). |
| 3 | Update, but don’t convert from Lowdin orbitals. |
| 10 | Update second force array instead of first. (For Opt=MNDOFC). |
L405: NRow.
IOp(4/25)
L402: Wavefunction.
| 0 | Default (Same as 1). |
| 1 | Single determinant, RHF/UHF from IOp(4/5). |
| 2 | ROHF (NYI). |
| 3 | Bi-radical 1/2 CI (only for MINDO3, MNDO, AM1). |
| 4 | Closed-shell 1/3 CI (only for MINDO3, MNDO, AM1). |
| 5 | General CI, using specified orbitals. |
| -N | General CI, with N microstates read in. |
L405: 10 binary switches.
IOp(4/26)
Whether to mix orbitals in generated guess density.
| 0 | No. |
| -3 | Yes, mix valence occupieds with 0.05 au (according to ZDO) of the HOMO and virtuals within 0.15 au. |
| -2 | Yes, mix valence orbitals and an equal number of virtuals. |
| -1 | Yes, mix all equally. |
| N | Equal occupations of the lowest N virtuals and high N occupieds. |
IOp(4/28)
L402: SCF Convergence (10-N, default 10-7).
IOp(4/29)
L405: Number of core orbitals.
IOp(4/31)
Root to solve for in CI (402) (Default is 1).
IOp(4/33)
Printing of guess.
| 0 | No printing. |
| 1 | Print the MO coefficients. |
| 2 | Print everything. |
IOp(4/34)
Dump option.
| 0 | No dump. |
| 1 | Turn on all possible printing. |
IOp(4/35)
Overlap matrix.
| 0 | Default (copy on disk is used). |
| 1 | Overlap assumed to be unity. |
| 2 | Copy on disk is used. |
IOp(4/36)
ZIndo reformatting.
| 0 | No. |
| 1 | Yes, reformat ZIndo integrals and wavefunction into RWF. |
IOp(4/37)
L402: Selection of old MNDO parameters.
| 0 | Defaults. |
| 1 | Old Si parameters. |
| 2 | Old S parameters. |
IOp(4/38)
Generalized density to use for natural orbitals.
| 0 | Default (-1, current for method on chk). |
| N | Density number N. |
IOp(4/39)
Angle for mixing during Guess=Mix.
| 0 | Default (Pi/4). |
| N | Pi/N. |
IOp(4/43)
L402: Handling of background charge distribution.
| 00 | Same as 21 for MM, 22 for everything else. |
| 1 | Consider external charges. |
| 2 | Do not consider external charges. |
| 10 | Consider self-consistent solvent charges. |
| 20 | Do not consider self-consistent solvent charges. |
| L405: = IDiEij: = switch for direct matrix element calculation. | |
| 0 | For normal route, with all matrix elements calculated here and stored on disk. Configs printed as normal. |
| 1 | For direct route. Eij’s calculated here and stored on disk. A flag is automatically sent to L510 to tell it to compute the remaining matrix elements directly. This type of computation can only be done in a CAS comp. Also L510 must use Lanczos. |
| 2 | Like option 1, but all configurations are printed. This will be the only way to print configs in a direct matrix element calc, since there can be many thousands in a large CAS. |
IOp(4/44)
L405: When set to 1, prepares input for CAS-MP2 (generates data for use in MC-SCF generation of zeroth order H). Implies IOp(21)=10 Slater Det. option. Note: for b=0 (i.e., no unpaired spins), forces use of Clifford Algebra Spinors instead of simple determinants.
IOp(4/45)
Ipairs= number of GVB pairs in GVBCAS.
| 0 | Default. No pairs, normal CAS calculation. |
| N | There are N pairs: 2*n extra orbitals and electrons will be added into the active space later. L405 performs a CAS on the inner space, and sets up L510 to compute extra matrix elements etc. implicitly. This is a normal GVBCAS calculation. |
| -N | There are N pairs: 2*n orbitals and electrons of the specified CAS are to be considered to be GVB type orbitals when generating configs/matrix elements. L510 will execute normally. This occupies as such space as a full CAS in this link, but is smaller subsequently. This is the GVBCAS test mode. |
IOp(4/46)
CI basis in CASSCF.
| 1 | Hartree-Waller functions for singlets. |
| 2 | Hartree-Waller functions for triplets. |
| 3 | Slater determinants. |
| 10 | Write SME on disk. |
IOp(4/47)
Convert to sparse storage after generating guess.
| -3 | Save sparse storage Fock matrix for guess. |
| -2 | Save full storage Fock matrix for guess. |
| -1 | No, use the Lewis dot structure to generate a sparse guess directly. |
| 0 | Default (-1 if sparse is turned on). |
| 1 | Yes. |
IOp(4/48)
L402: Whether to do (sparse) conjugate gradient methods.
| 0 | No. |
| 1 | Yes. Use Lewis dot structure guess density. |
| 2 | Yes. Use diagonal guess density. |
IOp(4/60)
Override standard values of IRadAn.
IOp(4/61)
Override standard values of IRanWt.
IOp(4/62)
Override standard values of IRanGd.
IOp(4/63)
Flags for which terms to include in MM energy.
| 0 | Default (111111). |
| 1 | Turn on all terms, r-1 Coulomb. |
| 2 | Turn on all terms, r-2 Coulomb. |
| 10 | Turn on non-bonded terms. |
| 100 | Turn on inversions/improper torsions. |
| 1000 | Turn on torsions. |
| 10000 | Turn on angle bending. |
| 100000 | Turn on bond stretches. |
IOp(4/65)
Tighten the zero thresholds as the SCF calculation proceeds.
| 0 | Default: Yes, initial threshold 5×10-5. |
| 1 | No variable thresholds. |
| N | Yes, initial threshold 10-N. |
| N<-100 | Yes, initial threshold 5 x 10 N+100. |
IOp(4/66)
Dielectric constant to be used in MM calculations.
| 0 | Eps = 1.0. |
| N | Eps = N / 1000. |
IOp(4/67)
Whether to use QEq to assign MM charges.
| 0 | Default (211 if UFF, 2 otherwise, 1⇒ 221). |
| 1 | Do QEq. |
| 2 | Don’t do QEq. |
| 00 | Default (20). |
| 10 | Do for atoms which were not explicitly typed. |
| 20 | Do for all atoms regardless of typing. |
| 000 | Default (200). |
| 100 | Do for atoms which have charge specified or defaulted to 0. |
| 200 | Do for all atoms regardless of initial charge. |
IOp(4/68)
L402: Convergencecriterion for micro-iterations.
| 0 | Default. |
| N | 10-N. |
IOp(4/69)
Whether to do a new additional guess in addition to reading orbitals from the RWF.
| 0 | Default (2). |
| 1 | Yes if no Guess=Alter, Harris guess, and not a small geometry step. |
| 2 | Do not do the extra guess. |
| 3 | Do the extra guess and store as the initial Fock matrix. |
| 4 | Do the extra guess regardless. |
| 5 | Store the normal guess as the alternative (for SimOpt). |
| 00 | Default (10 for PBC, 20 otherwise). |
| 10 | Save the Harris guess as an initial Fock matrix. |
| 20 | Just generate orbitals from the Harris guess. |
IOp(4/71)
L402: Write out AM1 integrals.
| 0 | No |
| 1 | Yes |
IOp(4/72)
Irreps to keep in MCSCF CI-wavefunction.
| 0 | All |
| IJKLMNOP | List of up to 8 irreducible representation numbers to include. |
IOp(4/80)
The maximum conjugate gradient step size (MMNN).
| 0000 | No maximum step size. |
| MMNN | Step size of MM.NN. |
IOp(4/81)
Sparse SCF Parameters.
| MM | Maximum number of SCF DIIS cycles. (MM=00 defaults to 20 cycles, MM=01 turns DIIS off). |
| NN00 | F(Mu,Nu) atom–atom cutoff criterion (angstroms) Mu, Nu are basis functions on the same atom.(defaults to no F(Mu,Nu) cutoff). |
| PP0000 | F(Mu,Lambda) atom–atom cutoff criterion (angstroms) Mu, Lambda are basis functions on different atoms. (defaults to 15 angstroms). |
IOp(4/82)
Conjugate-Gradient Parameters.
| MM | Maximum number of CG cycles per SCF iteration. (defaults to 4 CG cycles). |
| NN00 | Maximum number of purification cycles per CG iteration. (defaults to 3 cycles). |
| 00000 | Don’t use CG DIIS. |
| 10000 | Use CG DIIS. |
| 000000 | Polak-Ribiere CG minimization. |
| 100000 | Fletcher-Reeves CG minimization. |
| 0000000 | Use diagonal preconditioning in Conjugate-Gradient. |
| 1000000 | No preconditioning. |
IOp(4/90)
L402: Step size in dynamics (see IOp(4/8) in L118).
| 0 | Default (0.025 femtosec). |
| N | N*0.0001 femtosec. |
IOp(4/91)
L402: Trajectory type and initial velocity (see IOp(4/9) in L118).
| 0 | Default (same as 4). |
| 3 | Read in initial Cartesian velocity. |
| 4 | Read in initial mass weighted Cartesian velocity. |
IOp(4/92)
L402: Maximum points in one trajectory (see IOp(4/42) in L118).
| 0 | Default (100). |
| N | N points in trajectory. |
IOp(4/93)
L402: Read isotopes for trajectory (see IOp(4/45) in L118).
| 0 | Do not read isotopes. |
| 1 | Read isotopes. |
IOp(4/96-99)
RAS parameters (1O,1H,3O,3E).
IOp(4/100)
IOp(4/110)
L402: Scaling of rigid fragment steps during micro-iterations.
| 1 | Scale by (# fragatoms)-1. |
| 2 | Scale by 1/SQRT (# fragatoms). |
| N | Scale by N/1000. |
IOp(4/111)
| 0 | Default (2). |
IOp(4/112)
Compression for ONIOM.
| 4 | Compressed Hessian over active atoms. For MM calculations on the real system, this converts a second derivative calculation to just forces, since the real system 2nd derivatives are computed during micro-iterations. |
| N≥4 | Full storage. (default) |
IOp(4/113)
L402: Which external method to use for ONIOM calculations using different external commands for 2 or more levels.
| 0 | Default (First external command). |
| N | Nthexternal command (command N in file 747). |
IOp(4/114)
Which ONIOM system is being done, which is sometimes needed by external procedures.
| 0 | Default (1). |
| 1 | Real system. |
| 2 | Model system for 2-layer, middle for 3-layer. |
| 3 | Small model system for 3-layer. |
IOp(4/115)
Mixing of orbitals for GHF/Complex testing.
| 0 | Default (No, unless generate guess for complex). |
| 1 | Make MO coefficients complex. |
| 2 | Don’t rotate real and imaginary components of MOs. |
| 10 | Mix alpha and beta orbitals for GHF. |
| 100 | Read in S vector to apply to FC perturbation. |
| 200 | Read in complex-style SR, SI for GHF. |
| 0000 | Default FC perturbation (1). |
| 1000 | FC with MBS core orbitals blanked. |
| 2000 | Full FC. |
| 3000 | FC with MBS core orbitals blanked, applied only to s and p functions. |
IOp(4/116)
Functional to use in Harris guess.
| 0 | Default: PBEPBE for HSE2PBE, HSE(H)1PBE and any functional involving the kinetic energy or Laplacian, the pure version of the functional for pure and hybrid GGAs, and SVWN3 for HF. |
| N | Functional # (see values in 3/74). |
IOp(4/117)
Set flag for BD Guess=Read.
| 0 | No. |
| -1 | Yes. |
IOp(4/118)
Whether to do GHF/Complex diagonalization for Harris and Core guesses.
| 0 | Default (1). |
| 1 | Yes. |
| 2 | No, generate UHF guess and convert. |
IOp(4/119)
Printing MM energy contributions and force field parameters.
| 0 | Default (print contributions if #p). |
| 1 | Print contributions. |
| 2 | Don’t print contributions. |
| 00 | Default (20). |
| 10 | Print all terms in the force field. |
| 20 | Don’t print the force field. |
IOp(4/120)
L402: Number of MM microiterations allowed.
| 0 | Default, based on N Atoms but at least 5000. |
| 0 | N. |
IOp(4/121)
Convergence of iterative Harris guess.
| 0 | Default (0.02). |
| N>0 | N/10000. |
| N<0 | 10N. |
IOp(4/122)
Maximum number of iterations for iterated Harris:
| 0 | Default, 20. |
IOp(4/123)
Control of generation QEq charges in Harris guess. See description ICntrl in GenChg.
IOp(4/124)
L402: File options for External.
IOp(4/125)
L402: Options for unformatted I/O file; see RW2BAF.
IOp(4/126)
L402: IDefCm for External.
IOp(4/127)
Whether to print atomic spin vectors, etc.
| 0 | Default (2). |
| 1 | Yes. |
| 2 | No. |
IOp(4/128)
Whether to print analysis of projection for read-in guesses:
| 0 | Default (122 if using symmetry in diagonalization, 222 otherwise). |
| 1 | Yes. |
| 2 | No. |
| 10 | Symmetrically orthogonalize core and valence occupieds together. |
| 20 | Symmetrically orthogonalize core and valence occupieds separately. |
| 100 | Always project virtuals. |
| 200 | Only project virtuals for CAS. |
IOp(4/129)
Whether to read energy from chk during Guess=Read (i.e., with SCF=Skip):
| 0 | Default(No). |
| 1 | Yes. |
IOp(4/130)
Store dispersion energy and derivatives as total?
| 0 | Default (No). |
| 1 | Yes. |
IOp(4/131)
L402: Whether to include charges in MM calculations in.
| 0 | Default (check ILSW for whether ONIOM or QM/MM-style). |
| 1 | ONIOM-style, so include. |
| 2 | Do not include. |
IOp(4/132)
Copy MOs from chk file to reference phase file on rwf. Reference CIS/TD amplitudes are also copied, if found on the chk file.
| 0 | Default(No). |
| 1 | Copy. |
| 10 | Flip sign of MOs. |
| 20 | Flip sign of amplitudes. |
| 30 | Flip sign of both MOs and amplitudes. |
IOp(4/134)
L505: Generate data for testing.
| -2 | No |
| -1 | Copy files 838 and 839 from CHK to RWF. |
| 0 | No. |
| 1 | Store the alpha and beta densities. |
| 2 | Store the CIS/TD transition densities as square. |
| 3 | Store the CIS/TD transition densities as lower triangles. |
| Nx | Store N copies of the matrices, scaling later ones. |
| LLMMxx | Use only CIS/TD densities for states LL to MM. |
| 1000000 | Do response matrices. XC contribution uses the regular ground-state density for the unperturbed density. |
IOp(4/135)
Handling of spin-orbit integrals.
| 0 | Default (3 if doing GHF, 2 otherwise). |
| 1 | If present and doing GHF, convert from 3 real lt arrays to GHF format. |
| 2 | Do not do any conversion. |
| 3 | If present and doing GHF, convert and increment the core hamiltonian. |
IOp(4/136)
Spin rotation of GHF orbitals.
| 0 | No. |
| 1 | Rotate by 0.2 radian using diag(iT,-iT). |
| 2 | Rotate by 0.2 radian using offdiag(T,-T). |
| 3 | Rotate by 0.2 radian using offdiag(iT,iT). |
| 4 | Read the three parameters (D,ODR,ODI) for delta. |
